Hi, I'm new to the forum having found it while scouring the net for answers. Bit of a cheek to wade straight in with a question but here it comes anyway.
I am in the middle of acquiring all the major players b/a rifles from WW2 Enfield, Mauser, MAS etc and have stalled at the Arisaka.
The brass can be had (at breathtaking prices) but nobody seems to sell the right type of jacketed bullet here.
Is there anybody shooting a type 38 in the uk who can let me know where they get suitable FMJs or what they are doing to keep shooting. Would resizing Carcano bullets be viable?
Any pointers gratefully recieved.
Type 38 Arisaka, reloading in the UK question.
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Type 38 Arisaka, reloading in the UK question.
If you don't mind me re posting this question on another forum I might be able to get you some answers.
-
Satyruk
Re: Type 38 Arisaka, reloading in the UK question.
Please go ahead, thanks.Alpha1 wrote:If you don't mind me re posting this question on another forum I might be able to get you some answers.
Re: Type 38 Arisaka, reloading in the UK question.
Ok I will see what they come up with.
Arisaka re loading data required.
Satyruk asked the following question in the milsurp thingy section I took the liberty of moving it here in case any one can help him.
Hi, I'm new to the forum having found it while scouring the net for answers. Bit of a cheek to wade straight in with a question but here it comes anyway.
I am in the middle of acquiring all the major players bolt action rifles from WW2 Enfield, Mauser, MAS etc and have stalled at the Arisaka.
The brass can be had (at breathtaking prices) but nobody seems to sell the right type of jacketed bullet here.
Is there anybody shooting a type 38 in the uk who can let me know where they get suitable FMJs or what they are doing to keep shooting. Would resizing Carcano bullets be viable?
Any pointers gratefully recieved.
Hi, I'm new to the forum having found it while scouring the net for answers. Bit of a cheek to wade straight in with a question but here it comes anyway.
I am in the middle of acquiring all the major players bolt action rifles from WW2 Enfield, Mauser, MAS etc and have stalled at the Arisaka.
The brass can be had (at breathtaking prices) but nobody seems to sell the right type of jacketed bullet here.
Is there anybody shooting a type 38 in the uk who can let me know where they get suitable FMJs or what they are doing to keep shooting. Would resizing Carcano bullets be viable?
Any pointers gratefully recieved.
Re: Type 38 Arisaka, reloading in the UK question.
I also took the liberty of posting your question in the reloading section.
Re: Arisaka re loading data required.
You could use cast boolits if you slug your bore you could buy a suitable mould and roll your own. It would be a lot kinder on the old Girl as well. If you slug your bore you might even be able to purchase boolits from Dodgy rog. Ask Adam(Dromia) if you think cast boolits will do it for you he is the resident expert.
Re: Arisaka re loading data required.
A guy called riceone was the expert on Arisakas he used to have a web site don't know if he still does. You could try a web search.
-
dromia
- Site Admin
- Posts: 20241
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Type 38 Arisaka, reloading in the UK question.
Welcome Satyruk.
Why don't you introduce your self on the New Members Forum?
What did the bore/groove measurements come out at when you slugged your barrel?
When you have that information then we are in a position to make suggestions for your rifle.
Bore/groove diameters vary on these rifles, I have seen some shoot well with standard .264" condoms but others like the larger bullet, Hornady do a very good 160 gn .267" round nose soft point for the Carcano. They are expensive though and you will need a expanding ammunition variation for them on your FAC.
I would find out the actual diameter of the PPU Carcano bullet before spending money on them.
The preferred way to get these old guns to give of their best and keep them intact for future generations is to shoot cast bullets in them
Why don't you introduce your self on the New Members Forum?
What did the bore/groove measurements come out at when you slugged your barrel?
When you have that information then we are in a position to make suggestions for your rifle.
Bore/groove diameters vary on these rifles, I have seen some shoot well with standard .264" condoms but others like the larger bullet, Hornady do a very good 160 gn .267" round nose soft point for the Carcano. They are expensive though and you will need a expanding ammunition variation for them on your FAC.
I would find out the actual diameter of the PPU Carcano bullet before spending money on them.
The preferred way to get these old guns to give of their best and keep them intact for future generations is to shoot cast bullets in them
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Who is online
Users browsing this forum: No registered users and 3 guests