Using a Victor Meldrew Voice - "I don't believe it!"
Took Jared shooting tonight and after putting 60 rounds of 44mag down range had a non-fire, waited 30secs and ejected the cartridge, no strike on the primer. Loaded another round and same thing.
The replacement firing pin I got in March has broken, same place as the original, the tip/pin that strikes the primer has broken off. It's lasted about 5 months (same as the first one) and has only shot about 300 rounds.
I've emailed Viking and asked them to collect the rifle and have it checked, there's no way a firing pin should only be lasting a few months.
Another Problem!
Moderator: dromia
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Another Problem!
There's room for all Gods creatures, next to the mash and gravy :)
-
saddler
Re: Another Problem!
BUT
IF they were BOTH made at the same time - they may both have had the same heat treatment = which in the case of the first one was not too good, so the replacement would do the same, break
IF they were BOTH made at the same time - they may both have had the same heat treatment = which in the case of the first one was not too good, so the replacement would do the same, break
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Another Problem!
Indeed I'd thought of that but can't see anything online about a bad batch of pins or in fact much about Henry problems at all!, one broken pin in a 22rf but that's about it.
I've posted for info on the Henry Users group which is fairly lacking in posts as it seems everyone is happy with their Henrys
I've posted for info on the Henry Users group which is fairly lacking in posts as it seems everyone is happy with their Henrys
There's room for all Gods creatures, next to the mash and gravy :)
Re: Another Problem!
Sods law....
Political Correctness is the language of lies, written by the corrupt , spoken by the inept!
-
TattooedGun
- Posts: 2518
- Joined: Mon Jul 11, 2011 11:55 am
- Home club or Range: Dudley Rifle Club, UKPSA, Bromsgrove
- Location: West Midlands
- Contact:
Re: Another Problem!
:lol: :lol: :lol: :lol:saddler wrote:...were you using reloads ? :55:tongueout
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Another Problem!
saddler wrote:...were you using reloads ? :55:
"I refuse to answer on the grounds that this may incriminate me"
There's room for all Gods creatures, next to the mash and gravy :)
Re: Another Problem!
No he wasn't........
Political Correctness is the language of lies, written by the corrupt , spoken by the inept!
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Another Problem!
The cheque is in the post, say nothingChuck wrote:No he wasn't........
There's room for all Gods creatures, next to the mash and gravy :)
-
R.G.C
Re: Another Problem!
I have no idea how the mechanism is made, but first thing I would check is if the FP moves absolutely freely and well in centre of the FP hole.phaedra1106 wrote:Using a Victor Meldrew Voice - "I don't believe it!"
Took Jared shooting tonight and after putting 60 rounds of 44mag down range had a non-fire, waited 30secs and ejected the cartridge, no strike on the primer. Loaded another round and same thing.
The replacement firing pin I got in March has broken, same place as the original, the tip/pin that strikes the primer has broken off. It's lasted about 5 months (same as the first one) and has only shot about 300 rounds.
I've emailed Viking and asked them to collect the rifle and have it checked, there's no way a firing pin should only be lasting a few months.
R.G.C
Who is online
Users browsing this forum: No registered users and 1 guest