HK says not suitable in hand primers, on the web it says suitable for all applications.
I guess a phone call will clear that up, just curious as to why the primers would not be ok in hand primers.
HK Primers
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Christel
- Site Admin
- Posts: 17534
- Joined: Fri Nov 05, 2010 7:52 pm
- Location: Wind Swept Denmark
- Contact:
HK Primers
Anyone tried them?
HK says not suitable in hand primers, on the web it says suitable for all applications.
I guess a phone call will clear that up, just curious as to why the primers would not be ok in hand primers.
HK says not suitable in hand primers, on the web it says suitable for all applications.
I guess a phone call will clear that up, just curious as to why the primers would not be ok in hand primers.
-
mag41uk
- Posts: 1853
- Joined: Sat Oct 13, 2012 3:50 pm
- Home club or Range: Aldershot R & P Club
- Location: Reading
- Contact:
Re: HK Primers
I wonder who is making them?
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: HK Primers
Probably Serbian I'd guess
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
Re: HK Primers
That's what I have read elsewhere.dodgyrog wrote:Probably Serbian I'd guess
-
Mattnall
- Full-Bore UK Supporter
- Posts: 2943
- Joined: Wed Mar 06, 2013 5:32 pm
- Home club or Range: NRA, Redricks TSC, BS1944RC, HRA
- Location: East Herts
- Contact:
Re: HK Primers
The samples I have come from two different countries in the eastern block.
The pistol ones come from Bosnia, one of the rifle sizes (small or large, I cannot remember which) came from a different country close by.
The pistol ones come from Bosnia, one of the rifle sizes (small or large, I cannot remember which) came from a different country close by.
Arming the Country, one gun at a time.
Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
-
Mattnall
- Full-Bore UK Supporter
- Posts: 2943
- Joined: Wed Mar 06, 2013 5:32 pm
- Home club or Range: NRA, Redricks TSC, BS1944RC, HRA
- Location: East Herts
- Contact:
Re: HK Primers
One of the rifle sizes I had came from one of the Baltic states.
All my rifle cases I prime with a hand primer and had no trouble with these. The pistol ones are usually done on the press, again no trouble.
They also functioned as well as expected with no problems.
All my rifle cases I prime with a hand primer and had no trouble with these. The pistol ones are usually done on the press, again no trouble.
They also functioned as well as expected with no problems.
Arming the Country, one gun at a time.
Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
-
Christel
- Site Admin
- Posts: 17534
- Joined: Fri Nov 05, 2010 7:52 pm
- Location: Wind Swept Denmark
- Contact:
Re: HK Primers
It sounds like they are worth a go.
I will give them a call. Gearing up for the end of lock down :)
I will give them a call. Gearing up for the end of lock down :)
-
mag41uk
- Posts: 1853
- Joined: Sat Oct 13, 2012 3:50 pm
- Home club or Range: Aldershot R & P Club
- Location: Reading
- Contact:
Re: HK Primers
I wonder if they are repackaged "GINEX" primers.
I bought loads of these from the "Dutch" feller who used to come to Bisley.
Still have several thousand Large Pistol loose in 2.5k boxes!
They work well and I use them in hand primers and on the press.
I bought loads of these from the "Dutch" feller who used to come to Bisley.
Still have several thousand Large Pistol loose in 2.5k boxes!
They work well and I use them in hand primers and on the press.
-
Christel
- Site Admin
- Posts: 17534
- Joined: Fri Nov 05, 2010 7:52 pm
- Location: Wind Swept Denmark
- Contact:
Re: HK Primers
Jasper.
Re: HK Primers
Just primed 10 off 6.5 Creedmoor Starline brass with these.
Tight fit, very tight fit.
Almost impossible to seat with hand primer, still hard even using the press.
Will take some measurements tomorrow, to try and see if it’s the primers or the brass.
Tight fit, very tight fit.
Almost impossible to seat with hand primer, still hard even using the press.
Will take some measurements tomorrow, to try and see if it’s the primers or the brass.
Who is online
Users browsing this forum: No registered users and 3 guests