280AI

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
280ACK

280AI

#1 Post by 280ACK »

Anyone loading this calibre at all? RS62 that I have looks great & curious about RS70.
Cheers guys
Scrumbag
Posts: 92
Joined: Wed Jul 29, 2020 3:45 pm
Home club or Range: BSRC & HPRPC
Contact:

Re: 280AI

#2 Post by Scrumbag »

280ACK wrote:Anyone loading this calibre at all? RS62 that I have looks great & curious about RS70.
Cheers guys
I have loaded RS70 in a 26" barreled 7x64 with the Hornady 180gr ELD-M. I found it pretty good with my limited experience.

Any particular questions you had?

Scrummy
User avatar
dodgyrog
Posts: 4103
Joined: Wed Jan 05, 2011 11:17 pm
Home club or Range: Three Counties Sporting Club & Gardners Guns
Location: Consett, County Durham
Contact:

Re: 280AI

#3 Post by dodgyrog »

You could join the Ackley Improved group on Facebook and ask the question
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests