Dillon Super Swage 600 owners - advice please

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
DaveT

Re: Dillon Super Swage 600 owners - advice please

#21 Post by DaveT »

Alpha....that's what I will go back to!
User avatar
Sim G
Posts: 10753
Joined: Sat Nov 06, 2010 9:09 pm
Contact:

Re: Dillon Super Swage 600 owners - advice please

#22 Post by Sim G »

After struggling for so long, I went to even teaming out the crimp by hand. That was just ridiculous. It was a mate who loaned me his RCBS swager and after a dozen or so, ordered my own. Sheer simplicity and works straight off the bat.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?

Guns dont kill people. Dads with pretty Daughters do...!
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests