Gunsmithing question...easy fix: re-locate front sight base?
Moderator: dromia
Forum rules
Should your post be in Grumpy Old Men? This area is for general shooting related posts only please.
Should your post be in Grumpy Old Men? This area is for general shooting related posts only please.
Re: Gunsmithing question...easy fix: re-locate front sight b
Rotating the barrel would then throw the rearsight dovetail & ejector notch off true.
More work than just fixing the front sight base
More work than just fixing the front sight base
- Dark Skies
- Posts: 2860
- Joined: Tue Apr 22, 2014 11:02 am
- Home club or Range: NRA
- Contact:
Re: Gunsmithing question...easy fix: re-locate front sight b
In my, admittedly limited, experience sights are generally silver soldered on (when not screwed on). You would probably be fine with a low melting point jewellers silver solder and could possibly limit the prep (and thereby damage to the blueing) to the area concerned with a small Swiss file and solder with a light application of a pencil flame.
I've done several Mosins M44s in this manner (I removed the bayonet brackets entirely) and damage to bluing was next to nothing - by their very nature the barrels get very hot in use so can withstand a fair bit of heat without touching the finish..
I've done several Mosins M44s in this manner (I removed the bayonet brackets entirely) and damage to bluing was next to nothing - by their very nature the barrels get very hot in use so can withstand a fair bit of heat without touching the finish..
"I don't like my job and I don't think I'm gonna go anymore."
- snayperskaya
- Posts: 7234
- Joined: Fri Oct 04, 2013 6:43 pm
- Home club or Range: West Bank of the Volga.....
- Location: West of The Urals
Re: Gunsmithing question...easy fix: re-locate front sight b
[
Might be a silly question but why?Dark Skies wrote:
I've done several Mosins M44s in this manner (I removed the bayonet brackets entirely) and damage to bluing was next to nothing - by their very nature the barrels get very hot in use so can withstand a fair bit of heat without touching the finish..
"The only real power comes out of a long rifle." - Joseph Stalin
Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.
More than a vested interest in 7.62x54r!
Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.
More than a vested interest in 7.62x54r!
Re: Gunsmithing question...easy fix: re-locate front sight b
Well, in the Forth Reich bayonets are not allowed as a permanent fixture.
I know of a few FAC holders that have a M-N carbine on FAC, but they are not allowed to take the rifle out of the house as they'd then have an offensive weapon in a public place!
I know of a few FAC holders that have a M-N carbine on FAC, but they are not allowed to take the rifle out of the house as they'd then have an offensive weapon in a public place!
Re: Gunsmithing question...easy fix: re-locate front sight b
Who says they cannot ??saddler wrote:Well, in the Forth Reich bayonets are not allowed as a permanent fixture.
I know of a few FAC holders that have a M-N carbine on FAC, but they are not allowed to take the rifle out of the house as they'd then have an offensive weapon in a public place!
You would have a reasonable excuse in it being permanently attached to the rifle for which you have a FAC.
If you took this to its natural conclusion, the brass / steel buttplates on WW2 rifles are there as offensive weapons too - not for comfort !!!
Re: Gunsmithing question...easy fix: re-locate front sight b
Who?
Police Scotland & SNP Partie HQ types at Holyrood
It's been discussed in depth on various forums.
Not heard of it being resolved...."they" are awaiting a sacrificial goat for a legal test case.
Police Scotland & SNP Partie HQ types at Holyrood
It's been discussed in depth on various forums.
Not heard of it being resolved...."they" are awaiting a sacrificial goat for a legal test case.
Re: Gunsmithing question...easy fix: re-locate front sight b
Wont happen.saddler wrote:Who?
Police Scotland & SNP Partie HQ types at Holyrood
It's been discussed in depth on various forums.
Not heard of it being resolved...."they" are awaiting a sacrificial goat for a legal test case.
Simply nonsense. A probationary officer on day one on his beat understands "reasonable excuse". And so does the PS who would need to charge. As would the CPS liason. As would the CPS.
In fact - being pedantic - something like a SMLE or K98 or Mosin is a MADE offensive weapon for the purposes of the definition of offensive weapon. The FAC is the reasonable excuse.
So the presence of a bayonet makes no difference - even without it, you have an made offensive weapon ( something designed and manufactured as a weapon regardless of the context in which it is later used )
Last edited by breacher on Mon Feb 27, 2017 12:02 am, edited 1 time in total.
Re: Gunsmithing question...easy fix: re-locate front sight b
Police Scotland would say different.
Re: Gunsmithing question...easy fix: re-locate front sight b
Have they started contacting owners of rifles with steel or brass buttplates yet ?saddler wrote:Police Scotland would say different.
:-)
They can say all they like but the definition is there in print as is the reasonable excuse aspect.
- Dark Skies
- Posts: 2860
- Joined: Tue Apr 22, 2014 11:02 am
- Home club or Range: NRA
- Contact:
Re: Gunsmithing question...easy fix: re-locate front sight b
Because I already had some really nice Mossie M44s but also like the M38 look. Now have one of each and sold the others.snayperskaya wrote:[Might be a silly question but why?Dark Skies wrote:
I've done several Mosins M44s in this manner (I removed the bayonet brackets entirely) and damage to bluing was next to nothing - by their very nature the barrels get very hot in use so can withstand a fair bit of heat without touching the finish..
"I don't like my job and I don't think I'm gonna go anymore."
Who is online
Users browsing this forum: No registered users and 2 guests