The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

Whos a good egg to fix the broken firing pin in a Swing Mk4 Bolt? Tried a couple of smiths & they dont have any parts.

Tip has broken off.........duno how, just goes ping (good practice for the misfire procedure for one of our novices though!)

:cheers:

A guy in our club makes them, I will ask him if he has any in stock.

SD

Have checked, he has none in stock.

Fultons usually have them apparently.

SD

What about HPS?
Tony

I have seen the job done (on my gun) in the field in 10 minutes with a medium screwdriver and a small allen key - nothing else. The critical bit is indeed having the spare firing pin, which can be turned on a lathe but needs appropriate heat treating - so you need a good machinist if you can't find a supplier. I have a spare in my toolkit, and I'm not selling it!

Iain

If you have a picture of the old one post it up please.

bought one in Fultons last year.....£40

H/man

Thanks all - waiting on another smith to advise stock. also looking at making one ..........

I assume the pin is held in place by a grub screw at the back or does it screw in as well? It does not look to be too much of a problem to build a new one.

ovenpaa wrote:I assume the pin is held in place by a grub screw at the back or does it screw in as well? It does not look to be too much of a problem to build a new one.

Back grub is a tad mauled & a small imperal size, its also grub screwed on the front collar but smaller than any allen key I have, that un locks it & that collar is on a thread, so tp make a pin its turn to 3 diameters, thread, chamfer, grind end, part off & heat treat.

Teh fracture face is circular fatigue with spiral beach marks to a pip in the centre. If i can get a magnified pic of that will post it us metallurgists will be enthralled ! :roll:

Might buy one.... mic it up then turn one out too.

£40 Fulrons seems most reasonable but also asked HPS.