Which moderator do you use ?

[Cruinneas]

I have had numerous suppressors over the years, but the three i'm currently using are:

An Ase Utra S7 on a .308

• Great mod, great results with little to no difference in POI out to 300yds with it on or off.
• Easy enough to clean.
• Best sound reduction.
• Heavy on the end of the barrel.
• More expensive than most other mods.
• Tough wearing and will last as long as the owner if treated right.

An Ase Jet-Z on other .308

• Same as above really other than it being slighter smaller/lighter.

T8 on 30-06 and .243

• Good on the .243 and 30-06, but difference in POI with mod on was 7" at 200yds.
• Prone to rusting.
• No more difficult to clean than an Ase, etc.
• Screws down over barrel so reducing excess weight on the end of the rifle.
• Has a resonance when fired.
• Cheapest of the current available stock of mods.
• Lighter than the Ase.

Wildcat Predator on .223

• Great mod, and very little in difference in POI with in on or off.
• Lighter than the Ase and ( i think) the T8.
• Screw down over the barrel for reduced weight.
• Completely comes apart for easy cleaning.
• Baffles can be changed allowig the mod to be used on a .223 up to .30cal wth new inners.
• Polymer housing gives no resonance.
• Cheaper than Ase, but a little more expensive than T8.