Page 2 of 2
Re: Stuck 30m1 brass
Posted: Thu Oct 15, 2020 8:57 pm
by Alpha1
Just use the Lee lube as is. Put a dollop on a felt pad spread it out and roll your cases in it. You just need a thin film then resize. Wipe the lube off after re sizing.
Re: Stuck 30m1 brass
Posted: Thu Oct 15, 2020 9:18 pm
by bradaz11
Do I need to do the entire side of the case? Or just top 1/4 inch
Sent from my pink toy using "An application"
Re: Stuck 30m1 brass
Posted: Thu Oct 15, 2020 9:27 pm
by Alpha1
Just roll the case in it coat the whole of the outside of the case from rim to the base.You only need a very light coating. Once it transfers onto the die things willl get easier.
Re: Stuck 30m1 brass
Posted: Thu Oct 15, 2020 10:11 pm
by bradaz11
Thank you. I'll give that a go Monday
Sent from my pink toy using "An application"
Re: Stuck 30m1 brass
Posted: Fri Oct 16, 2020 7:16 am
by Mattnall
bradaz11 wrote:..Also is IPA still stupid hard to get? As I've only got a small tin of it
..
Not too hard:
IPA 99.9%
Re: Stuck 30m1 brass
Posted: Fri Oct 16, 2020 6:05 pm
by WelshShooter
IPA can be bought on ebay at pre pandemic prices now. Bought 1L of 99% for around £8 on ebay a month or so ago.