The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

dromia wrote:"Seating the head"?

You know what I mean !!!!

No!

There was a little bar in Bangkok that.....

Ok -Seat the head!!!

Fix the Boolit head to the case - hope this helps

Nope still meaningless.

qws wrote:Ok -Seat the head!!!

Fix the Boolit head to the case - hope this helps

I think Dromia is asking for the following wordage: "seating the lead bullet into the brass case."

Head =/= bullet, the only time the "head" should be referenced to is with regards to the case head, i.e. where the "headstamp" is labels the calibre the case is intended for which may or may not include the manufacturer of the case.

Ok let's see if this passes our masters exacting standards - it could go on for thousands of reply posts !!!!

qws, Don't worry about it we get what you mean.

if the head of the brass is the bottom, is the bullet head the bottom of the bullet? so you are saying you aren't doing it upside down

+1 for Harvey Deprimer : http://blog.stegough.com/harvey-deprime ... ming-tool/

For Priming I use a Lee Hand Held (New version). Plastic lid has broken on both small and large primers, but a bit of tape holds it in place to get the job done.