Page 2 of 3
Re: Short and thick ?
Posted: Sun May 24, 2015 7:03 pm
by meles meles
ooh, what stock it that ?
Re: Short and thick ?
Posted: Sun May 24, 2015 7:23 pm
by DW58
It's a KRG X-Ray - see
here. They're sold here in the UK by March Scopes.
I've had it around six months and love it.
Re: Short and thick ?
Posted: Sun May 24, 2015 7:25 pm
by meles meles
Eeeek ! That's a tad expensive...
Re: Short and thick ?
Posted: Sun May 24, 2015 9:08 pm
by ovenpaa
March also have some nice accessories for the KRG chassis

Re: Short and thick ?
Posted: Mon May 25, 2015 7:41 am
by tackb
I run a 20" 308 for years , more than adequate to 800m
I think you'd be fine with a 16" barrel in 308 for 300m
Re: Short and thick ?
Posted: Mon May 25, 2015 1:44 pm
by meles meles
Hmmm, a very heavy 16 inch barrel is sounding quite appealing...
Bergara, do you think, or Lothar Walther ?
Re: Short and thick ?
Posted: Mon May 25, 2015 2:47 pm
by tackb
All premium barrels are good (border had a wobble a while ago but I think they are ok now) I have had success with old border and pac nor select match , short barrels are stiffer and in my experience seem easier to find accuracy from , my 308 was an original factory heavy tube from Remington and I got lucky and it was a real shooter .
With a shorter barrel you won't need to go excessively heavy
Re: Short and thick ?
Posted: Mon May 25, 2015 3:57 pm
by DOGGER2UK
Use a 16" or 18" barrel with a 1 in 10 twist (or faster) threaded for a quality moderator and you will also have a good subsonic rifle.......I know these things excite you!!
Re: Short and thick ?
Posted: Mon May 25, 2015 3:58 pm
by meles meles
Indeed they do.
Does anybody have opinions, or better still, experience of the Lothar Walther polygonally rifled barrels?
Re: Short and thick ?
Posted: Mon May 25, 2015 5:44 pm
by DW58
I've looked at those with considerable interest Mr Brock - I' be inclined to give one a go. Coulped with a suitable moderator you could end up with a very accurate and quiet boomstick.