Re: .303 Cast Bullets
Posted: Sun Dec 12, 2010 6:18 pm
Ya welocme bud. 'Steve' the savior :lol: , have agood look thru the site, hes worth his weight in gold !
Blu
The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.
All people seeking membership must contact admin after registering to be validated.
https://ns2.full-bore.co.uk/
.303 Cast Bullets
Page 2 of 2
Re: .303 Cast Bullets
Posted: Sun Dec 12, 2010 6:40 pm
Trakker, aye I used to use Steve's pages before, then I had a hard drive crash. Lost all my favourites and Steve's page was one of them and I could never remember the name of the site and no matter what I put in the search engine it never came up. Thanks again mate.
Blu
Blu
Re: .303 Cast Bullets
Posted: Sun Jan 02, 2011 5:02 pm
You should measure the diameter of your bullets and then make a chamber cast of your chambers
and see what the fit is.Bullet diameter should be a close fit to the throating and not groove size.
I wish you a success
Filippo
and see what the fit is.Bullet diameter should be a close fit to the throating and not groove size.
I wish you a success
Filippo
Re: .303 Cast Bullets
Posted: Wed Jan 05, 2011 11:44 pm
Accurate 5744 qo Viht 120 are a good choice.
Persoanlly, I use Viht 140 and push them a bit!!!
Persoanlly, I use Viht 140 and push them a bit!!!
Re: .303 Cast Bullets
Posted: Wed Jan 05, 2011 11:48 pm
dodyrog, what bullet weight do you use and how much N140?
Blu
Blu
Re: .303 Cast Bullets
Posted: Thu Jan 06, 2011 12:13 am
Dodyrog you use N140 for 303 cast bullits I would be intrested to see that recipe.
Re: .303 Cast Bullets
Posted: Thu Jan 06, 2011 8:23 am
I use around 39.5 grains of N140 behind 174-185 jacketed bullets but keep considering cast as well so I would be interested, especially if you have tried them at longer distances.