Ammo for Lantac Raven .223

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
Dr.D

Re: Ammo for Lantac Raven .223

#11 Post by Dr.D »

Cheers guys I will get some 62gn GGG's and and some 69gn SSK see how I get on.
Thought I would add a pic of my new toy, so excited! Been looking for a while for a AR15 saw this and I couldn't resist!
Attachments
Lantac Desktop.jpg
Dr.D

Re: Ammo for Lantac Raven .223

#12 Post by Dr.D »

Airbrush wrote:Cheers Airbrush, I will see how I go with it next weekend, but looking forward to going to a match and being part of it.
Cool, 5th March & 3rd April are the last 2 matches of this years winter league. ;)[/quote]

Great, I will try and get along to one of them bangbang
polemass

Re: Ammo for Lantac Raven .223

#13 Post by polemass »

Ah,12" barrel length club is expanding in CSR WL.... ;) just take a careful look at CoF for March-then choose rifle class and take enough ammo ...
User avatar
safetyfirst
Posts: 2651
Joined: Tue Nov 25, 2014 8:41 am
Contact:

Re: Ammo for Lantac Raven .223

#14 Post by safetyfirst »

Mine liked 69gn Sierra match kings with 22.5gn of Ram Tac behind it, loaded to max OAL but factory wise the advice here is good, suck it all and see!
User avatar
BamBam
Posts: 2695
Joined: Thu Dec 19, 2013 5:23 pm
Location: Royston vasey
Contact:

Re: Ammo for Lantac Raven .223

#15 Post by BamBam »

Dr.D wrote: Thought I would add a pic of my new toy, so excited! Been looking for a while for a AR15 saw this and I couldn't resist!
Nice rifle, what trigger do you have in it?
Image
Dr.D

Re: Ammo for Lantac Raven .223

#16 Post by Dr.D »

Cheers BamBam, It is just the Lantac single stage 4-5lb match trigger, but would like to upgrade it to a Geisselle 2 stage tigger or similar at some stage, but see how I get on as it is for now.
User avatar
WelshShooter
Full-Bore UK Supporter
Posts: 1813
Joined: Wed Jun 25, 2014 9:45 pm
Contact:

Re: Ammo for Lantac Raven .223

#17 Post by WelshShooter »

Dr.D wrote:Cheers guys I will get some 62gn GGG's and and some 69gn SSK see how I get on.
Thought I would add a pic of my new toy, so excited! Been looking for a while for a AR15 saw this and I couldn't resist!
This was pretty much the advice I was just going to offer. If you bought a ton of 69gr SMK bullets (for handloading) and find you don't get on with them I'll take them off your hands since I need to replenish my stock at some point.

Also, Ramshot Tac is a good ball powder for 223 with 69gr bullets. I also like Reload Swiss RS50 too so just grab whatever you can locally.
User avatar
BamBam
Posts: 2695
Joined: Thu Dec 19, 2013 5:23 pm
Location: Royston vasey
Contact:

Re: Ammo for Lantac Raven .223

#18 Post by BamBam »

Dr.D wrote:Cheers BamBam, It is just the Lantac single stage 4-5lb match trigger, but would like to upgrade it to a Geisselle 2 stage tigger or similar at some stage, but see how I get on as it is for now.
Lantac don't do a match trigger with the OEM trigger bow, probably a modified milspec trigger with spring kit.

The new Lantac 2 stage match trigger looks like this:

Image
Image
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests